|
LOXTON |
Australian Made PO Box 18 (Starcevich Road) LOXTON SA 5333 (AUSTRALIA) Phone: +61 8 8584 7609 Fax: +61 8 8584 6380 |
|
ENGINEERING WORKS PTY LTD A.B.N. 58 007 671 525 |
Model 1 - Red machine
|
||
| a. b. c. d. e |
Not level lift IH gearbox - gearbox is mounted on top of pulley 1 1/4" rotor shaft and bearings Unable to pivot wheels 3m (10') - 3.9m (13'), fixed towbar |
|
|
||
| a. b. c. d. e. |
Level lift IH gearbox - 3 groove pulley on top of gearbox 1 1/4" rotor shaft and bearings Able to pivot wheels 3m (10') - 3.9m (13'), fixed towbar |
|
|
||
| a. b. c. d. e. f. |
Level lift IH gearbox 3 groove pulley on top of gearbox 1 1/2" rotor shaft with cast housing regreasable bearings Able to pivot wheels Optional extra 16" rims fitted to standard HT Holden pattern hub 3m (10') - 3.9m (13'), fixed towbar |
|
|
||
| a. b. |
Altered pivoted axle
degree of angle after 08/09/75. 3.9m (13') Machine no. 75667 - 3m (10') Machine no. 75X317 Optional extra 16" rims now available on heavy duty stubs with 5 stud pattern after 15/07/80. 3.9m (13') Machine no. 801457 - 3m (10') Machine no. 80X453 |
|
|
||
March 1985 |
- 3.9m (13') Machine no. A852543
|
|
| 3.9m (13'), 4.6m (15') and 5.4m (18') only. 3m (10') remain same as model 3. | ||
| a. b. c. d. e. f. g. h. |
Level lift bellcrank
- model 4 New heavy duty gearbox - 4 groove pulley on gearbox 1 1/2" rotor shaft with cast housing regreasable bearings Altered degree of angle on pivoting stubs New pivoting towbar 3.9m (13'), 4.6m (15') and 5.4m (18') Jockey wheel 6.00 x 9 Wind up stand 3.9m (13') machine can be built up to 5.4m (18') |
|
|
||
| 3.9m (13'), 4.6m (15') and 5.4m (18') only. 3m (10') remain same as model 3. | ||
| a. b. c. d. e. f. g. h. i. j. k. l. |
Level lift bellcrank
- model 4 and 5 Heavy duty gearbox - 4 groove pulley on gearbox 1 1/2" rotor shaft with cast housing regreasable bearings Altered pivoted axle, degree of angle - model 5 3m (10') fixed towbar jockey wheel frame - model 4 and 5 Pivoting towbar 3.9m (13'), 4.6m (15') and 5.4m (18') Height adjustable tow tongue Wind up castor jockey wheel, 6.00 x 9 wheel Wind up stand 3.9m (13') machine can be built up to 5.4m (18') machine 4.6m (15') bolt on extension capable of windrowing (lighter crops) Walterscheid PTO standard from machine no. WAA882875 |
|
|
||
| The number (1) as
the third digit in the machine number indicates that the machine was
fitted at the factory with a 1000 rpm gearbox with a 1.53:1 ratio.
The number (2) as the third digit in the machine number indicates that the machine was fitted at the factory with a 1000 rpm gearbox with a 2:1 ratio. If there is no number then the machine was originally fitted with a
540 rpm gearbox with a 2.54:1 ratio. |
||
| a. b. c. d. e. f. g. h. i. j. k. l. m. n. o. p. q. r. s. |
October 1992 - Axle
legs made 25mm (1") longer Level lift bellcrank - Model 6 Heavy duty gearbox - 4 or 5 groove pulley on top 1 1/2" rotor shaft with cast housing regreasable bearings Altered pivoted axle degree of angle - Model 6 5 stud pattern 16" rims and hubs as standard until 11/09/98 6 stud pattern rims and hubs as standard after 11/09/98 Pivoting towbar 3.9m (13') to 9.45m (31') Height adjustable tow tongue Auto levelling castor jockey wheels 6.00 x 9 (2 of) Wind up stand 3.9m (13') machine can be built up to 9.45m (31') 4.6m (15') and 5.4m (18') bolt on extension capable of windrowing (lighter crops) Walterscheid PTO's standard Lifting 8" ram and hoses fitted standard Trunnion ram to towbar fitted standard 540 or 1000 rpm gearbox Full safety covers fitted 20/05/95 - special rubber guards standard 08/04/95 - Ratchet on inside jockey wheel (standard) |
|
|
All information on this website is © 2000, Loxton
Engineering Works Pty Ltd |